[JW Lua] FCBeatChartElement(s) - Problems with v0.66
Jan Angermüller
jan at angermueller.com
Mon Mar 13 15:59:23 CET 2023
Thank you very much, Robert, for this quick solution!
Yes, replacing MinimumPosition with ReferenceWidth in the header item
seems to have solved the problem.
Though I haven't run all my tests yet - only the one file.
*And do I understand you correctly that it is safe to change this for
all versions prior to v0.66 as well?*
Or let me put the question the other way around:
Is it really necessary to introduce incompatibility here?
All scripts that use .MinimumPosition from element 0 won't work anymore.
I have never noticed that MinimumPosition could be replaced with
ReferenceWidth, because storing in MinimumPosition updated the value in
ReferenceWidth too - for whatever reason.
I understand that it may be more clear to use ReferenceWidth directly.
However, it has worked fine so far in previous versions.
According to the new documentation "SetMinimumPosition can't be applied
to the init beat chart element".
So if MinimumPosition is not used in the header element anyway, then it
could still be used just for compatibility reasons.
Currently I have only updated the Perfect Layout code. But I'll have to
check the other plug-ins too.
I ask because the fix is a bit risky.
When updating the code you have to make sure only that only the 0-index
elements are affected and not the elements above index 0.
Jan
Am 13.03.2023 um 13:01 schrieb Robert Patterson:
> For the header (item 0), use ReferenceWidth instead of
> MinimumPosition. It might be worth reading the updated documentation.
> Item 0 is a header and has different properties than the rest of the
> items.
>
> I have found that editing beat charts is a fool's game unless you
> first transition them to manual mode. I added a new function that does
> a version of this. Unfortunately, Finale's algorithm for doing it is
> much more complicated, and it is too difficult to reverse engineer.
> But the version I provided is serviceable for most use cases.
>
> That said, if your code doesn't require transition to manual mode, and
> you are happy with it, it should continue to work. You'll just need to
> use the ReferenceWidth field on item 0 instead of MinimumPosition. Be
> aware that the ReferenceWidth is a scratch value and if Finale
> actually uses it, it has been extremely difficult to figure out how.
> My contact at MakeMusic says it is the minimum measure width that the
> chart can handle without collisions.
>
>
>
>
> On Mon, Mar 13, 2023 at 5:55 AM Jan Angermüller <jan at angermueller.com>
> wrote:
>
> Robert,
>
> in my further tests with v0.66 and Perfect Layout I noticed that
> the *FCBeatChartElement *functionality has changed significantly.
> My "insert space" function doesn't work anymore ... while it used
> to add more space, it now reduces the space in some cases.
>
> Attached is a test document and a code snippet.
> However, the problem occurs in all sorts of documents.
>
> The code simply prints the FCBeatChartElement properties from
> measure 4.
> It seems that there is a problem with the MinimumPosition on
> FCBeatChartElement 0.
>
> function plugindef()
> finaleplugin.LoadLuaSocket=true
> return "Test","Test","Test"
> end
> pluginname=plugindef()
> if finenv.IsRGPLua then require('mobdebug').start() end
> local measure=finale.FCMeasure()
> measure:Load(4)
> local beatcharts= measure:CreateBeatChartElements()
> local beatchart2
> for beatchart2 in each(beatcharts) do
> print("BC2",measure.ItemNo,beatchart2.ItemCmper,beatchart2.ItemInci,beatchart2.MeasurePos,beatchart2.HorizontalPosition,beatchart2.NextHorizontalPosition,beatchart2:CalcWidth(),beatchart2.MinimumPosition)
> end
>
> Before RGP Lua v0.66 (here JW Lua 0.54)
> BC2 4 4 0 4096 336 0 0*641*
> BC2 4 4 1 0 0 84 84 0
> BC2 4 4 2 1024 84 116 32 64
> BC2 4 4 3 1280 116 148 32 125
> BC2 4 4 4 1536 148 200 52 177
> BC2 4 4 5 2048 200 336 136 218
>
> RGP Lua v0.66
> "BC2" 4 4 0 4096 336 0 0 *0* -- 641 missing!
> "BC2" 4 4 1 0 0 84 84 0
> "BC2" 4 4 2 1024 84 116 32 64
> "BC2" 4 4 3 1280 116 148 32 125
> "BC2" 4 4 4 1536 148 200 52 177
> "BC2" 4 4 5 2048 200 336 136 218
>
> Any ideas?
>
> Jan
>
>
>
>
> Am 11.02.2023 um 18:01 schrieb Robert Patterson:
>> Okay, I will leave it. I am adding some additional properties for
>> clarity.
>>
>> The main concept that is missing is the concept of transitioning
>> the beat chart from automatic to manual. This is a concept I
>> discovered after extensive reverse-engineering of Finale
>> behavior. Unfortunately, I didn't get the comments into the PDK
>> before Jari withdrew from working on it.
>>
>> You basically cannot edit a beat chart unless you first
>> transition it to a manual beat chart. Finale does this when the
>> user manually edits it with the beat chart handles. I'm going to
>> add a method on FCBeatChartElements to do it programmatically.
>>
>>
>> On Sat, Feb 11, 2023 at 10:53 AM Jan Angermüller
>> <jan at angermueller.com> wrote:
>>
>> Robert,
>>
>> I use both classes a lot in Perfect Layout.
>> Though it still sometimes seems like a puzzle (or
>> incomplete?) to me too.
>> Adding more properties would be fine, but changing/splitting
>> the whole thing would have massive impact on the spacing
>> algorithms from Perfect Layout.
>>
>> If it really makes sense to you to change it, maybe you could
>> keep FCBeatChartElement(s) and add an alternative
>> implementation with a new name, so that the old one still can
>> be used. Not so nice, but very pragmatic ;-)
>>
>> Jan
>>
>> Am 11.02.2023 um 16:46 schrieb Robert Patterson:
>>> Hello,
>>>
>>> Does anyone use FCBeatChartElement or FCBeatChartElements?
>>> It appears to be incomplete to me, and I would also like to
>>> split the header out into its own class. This would be a
>>> breaking change, so I am not sure I'll do it. But I thought
>>> I would poll the group.
>>>
>>> Robert
>>>
>>>
>>> _______________________________________________
>>> JWLua mailing list
>>> JWLua at jwmusic.nu
>>> http://jwmusic.nu/mailman/listinfo/jwlua_jwmusic.nu
>>
>
> _______________________________________________
> JWLua mailing list
> JWLua at jwmusic.nu
> http://jwmusic.nu/mailman/listinfo/jwlua_jwmusic.nu
>
>
> _______________________________________________
> JWLua mailing list
> JWLua at jwmusic.nu
> http://jwmusic.nu/mailman/listinfo/jwlua_jwmusic.nu
--
Jan Angermüller
Orchideenstieg 13
22297 Hamburg
Tel. 040 - 28 94 84 82
Mobil 0173 - 99 33 904
www.elbsound.studio
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://jwmusic.nu/pipermail/jwlua_jwmusic.nu/attachments/20230313/51803912/attachment.htm>
More information about the JWLua
mailing list